HYSKORE 30275 Dual Damper Sighting and Shooting Machine Rest

Description

The HYSKORE® Dual Damper Machine Rest is a precision sighting tool that will provide maximum repeatability.
Over 80% of all center fire rifle shots made in the U.S. are made from guns in the .30 caliber range on down, therefore, this rest is designed to progressively absorb the recoil pulse from 5.56 / .223 up to and including .300 Winchester Magnum and .338 Winchester Magnum cartridges.
The rest features surgically precise and user friendly windage and elevation controls.
If you step back and take a look at the center fire rifles that are actually shot in this country you would find that 80% or more of the shots made are from rifles in the range of .223 / 5.56 up to and including the .300 Winchester and the .338 Winchester Magnums.
Guns larger than that are much more expensive to shoot and generally speaking have recoil that discourages repetitive shooting.
With that thought in mind, we designed the dual damper rest to be able to progressively absorb the recoil pulse on the above mentioned guns.
The objective of this rest is to provide absolute maximum repeatability from shot to shot.
This means that once a gun is properly mounted in the rest and the rest is properly secured to a table or platform that does not move it will repeat shot after shot whatever the gun and ammo combination is capable of producing.
If the rest is mounted, as previously mentioned, and you have a 1 M.O.A. gun / ammo combo the rest will repeat at 1 M.O.A.
If you have a 3 M.O.A. combo expect the rest to repeat at 3 M.O.A.
The rest will not make a 3 M.O.A. gun produce results at 1 M.O.A. ? Sorry!
In order to achieve this degree of repeatability precision engineering and components were required.
There are two N20 compression dampers that progressively absorb the recoil pulse and return the gun to battery. Since these are low resistance dampers, it may be necessary to push the gun / carrier assembly forward after each shot. The compression dampers are fixed to the lower frame in the gun carrier assembly.
The lower frame incorporates two longitudinal chrome plated shafts and the gun carrier assembly has four precision linear bearings that ride along these shafts.
The windage adjustment, which can be operated from either the left or right side, uses the same technology.
There are two linear bearings that ride on two chrome plated shafts to ensure a precise and smooth adjustment.
The elevation can be operated by either hand via a capstan style knob which moves the forward gun support up or down and this assembly can be locked in place with a T handled bolt.
In addition, in order to remove any possibility of shooter induced motion contamination the set is equipped with a remote hydraulic trigger release.
Although the rest is primarily designed for a hands free calibration of gun, sight, and ammunition, the rear vise assembly can be removed exposing a platform for a rest bag for use at the range.
The rest is designed to remove the variables for sighting calibration.
If, at the end of the day, with the gun out of the rest the focus needs to move to operator error.
Notice:
This product should only be used by a competent, experienced person on a modern weapon, in good mechanical condition that has been certified safe by a competent gunsmith.
We ship
only
to the lower 48 states.
This does NOT include, repeat, does NOT include Alaska, Hawaii, Puerto Rico, Guam, The Virgin Islands, etc.
Sometimes an item arrives damaged due to the shipping process.
(Think Ace Ventura Pet Detective.) We have no control over this.
However, for all items that are not on our discontinued list we have replacement parts which we would send out to you to correct any shipping issues.
For items that are discontinued, parts may or may not be available and we will indicate accordingly.
All of our items are fairly large and are packed 1 to the shipping carton.
Therefore, it is impossible for us to combine shipping.
In fact, shipping the boxes one by one would be less expensive than putting them both together in one box which would involve extra charges for the box and packing and also due to a larger volume a higher freight cost.
Finally, we do not set the shipping charges.
The shipping charges are set by the eBay shipping charge calculator.
If you go into the calculator, enter your zip code, etc. the information you will get will be the exact same amount that you will be charged for shipping.
We have no control over this.
At the end of the day we want you to be a happy customer and we do our very best to make sure that you get the item exactly as described.
If you have any questions we are available Monday through Friday 9 ? 4 Eastern Time to answer questions.
Our commitment for shipping is 5
business
days, but generally speaking, if we receive payment before noon eastern time we ship the next
business
day.
There are times when this has not happened due to extreme weather events which disrupt the UPS system and communications, such as, telephone and internet, due to power outages, or other events that may be beyond our control.
But you can rest assured that we want to get the item out of our hands as quickly as possible.
Thank you for your understanding.